Krell Industries DVD Standard Manuel d'utilisateur télécharger pdf (Page 11)

Video Type of Most Commonly Format

Signal Connector Labeled As Standard

RGB BNC RGB video, NTSC or PAL

sync on green

RGB, HSYNC, BNC RGB video, NTSC or PAL

VSYNC component sync

VGA Computer-type VGA, computer, NTSC or PAL

VGA connector PC, DB-15

(DB-15)

Component RCA Component video, NTSC or PAL

(YPbPr) YPbPr, YCbCr,

480p,

progressive

All of the progressive video outputs should be of comparable quality.

Multiple formats are provided for compatibility with various televi-

sions, monitors, and projectors. The DVD Standard has maximum

progressive scan flexibility. You can send a progressive signal to any

of the three connectors. For example, if the RGB/YPbPr switch is set

to RGB, then the RGB, YPbPr, and DB-15 outputs will all output

RGB signals.

See Back Panel Description, on page 15, for more information

about progressive scan video outputs.

Krell DVD Standard 7

Getting Started, continued

The RGB/YPbPr switch is active only when the DVD Standard is in the

stand-by mode. Changing the switch position while the component is

in the operational mode will not change the video output format.

IMPORTANT

The DVD Standard supports progressive scan (480p) video signals.

Progressive scan builds video screen content in one pass (as

opposed to two passes for nonprogressive or interlaced video), thus

providing better quality picture. Progressive video can also be con-

nected to a computer monitor.

The following table details the different progressive video signals,

connectors, labels, and formats supported by the DVD Standard.

To use the progressive scan video outputs on the DVD Standard, the tele-

vision or video monitor must have a 31.5 kHz horizontal scan rate and a

progressive or 480p video input.

Note

Progressive Scan

(Noninterlaced)

Video Outputs

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Pas de commentaire

Krell Industries DVD Standard Manuel d'utilisateur Page 11